NDT Automation provides an extensive line of transducer
that are used with all of its product and system applications. For information
on available transducers, please contact NDT Automation directly or send
your requirements via e-mail to: sales@ndtautomation.com.
MODEL #
DESCRIPTION - Representative Transducers
ISL-0204-GP
2.25 MHz, .5 in., Gen. Purpose, Immersion Transducer - non-focused
ISL-0504-GP
5.0 MHz, .5 in., Gen Purpose, Immersion Transducer
ISL-1004-GP
10 MHz, .5 in., Gen. Purpose, Immersion Transducer
ISL-1502-HR
15 MHz, .25 in., High Resolution, Immersion Transducer
ISL-2002-HR
20 MHz, .25 in., High Resolution, Immersion Transducer
1232-3/UHF
3 m (10) Sensor Cable w/UHF-BNC adapter
I-SHOE
Irrigated angle beam or TOFD shoe replacement. Must specify shear
or TOFD application (sets transducer sizing) and angle (45, 60 and
70 degrees are standard). High temperature wedge material option
available to 800 F (425 C) Consult NDTA for Pricing
T-WELD
2.25, 5 or 10 MHz (must specify), .5 in. diameter element, screw-in
type transducer for Weld (angle-beam) inspection. Used with I-SHOE
(above)
T-TOFD
2.25, 5 or 10 MHz (must specify), .25 in. diameter element, screw-in
type transducer for TOFD) applications. Used with I-SHOE (above)
UPK-TBC
Test Block (For General Immersion use)
UPK-MB-BALL
Test Block and Ball Set ( Needed for TCP)
*Note: For information and pricing of additional
UT sensors please contact NDT Automation directly.
Transducers are quoted as non-focused. For spherical focus, specify
focal length (in water). For all transducers ADD $50 for focusing
lens.
